18
6.1.3
The maximum cooling performance
is not available!
Please assure at all the installation
variations correct ventilation and
extraction, as described in item 6.3!
Fig.4
Fig.5
Rear installation often causes an unfavou-
rable installation arrangement, as ideal
ventilation cannot always be assured (e.g.
the lower ventilation grille is covered by the
bumper or the rear lights of the vehicle!)
(Fig. 4). The maximum cooling performan-
ce of the aggregate is actually not availa-
ble.
Another variant of the rear installation is
the side installation of the ventilation grilles
(fig. 5). The air-heat recirculation is very
restricted which means the heat exchan-
gers (condenser, absorber) cannot be ade-
quately cooled. The variant with an addi-
tional ventilation grille mounted in the floor
also has a bad airflow duct.
Rear installation
Air vent grille
not blocked !
OK!!
To Next Page
Loading...
