RM10.5(S)(T), RMS10.5(X)(S)(T) Safety instructions
17
Fire hazard
• Ensure clean and residue-free handling if silicon sealant or similar is
used. There is a risk of fire if silicone filaments come into contact with
hot parts or naked flames.
• Never use a naked flame to check the device for leaks.
• Only use propane or butane gas (not natural gas).
• The refrigerant in the refrigerant circuit is highly flammable and in the
event of a leakage combustible gases could build up if the appliance
is in a small room.
In the event of any damage to the refrigerant circuit (smell of
ammonia):
– Keep naked flames and potential ignition sources away from the
refrigerator.
– Ventilate the room well.
– Switch off the refrigerator.
Health hazard
• Do not operate the device if it is visibly damaged.
• If the AC power cable for this device is damaged, it must be replaced
by the manufacturer, a service agent or a similarly qualified person in
order to prevent safety hazards.
Risk of child entrapment
• Make sure that the shelves are mounted and secured so that children
cannot lock themselves in the refrigerator.
• Before disposing of your old refrigerator:
– Dismantle the drawers.
– Leave the shelves in the refrigerator so that children cannot climb
inside.
!
CAUTION! Failure to obey these cautions could result in minor or
moderate injury.
Electrocution hazard
• Before starting the device, ensure that the power supply line and the
plug are dry.
Risk of crushing
• Do not put your fingers into the hinge.
Health hazard
• To avoid a hazard due to instability of the refrigerator, it must be fixed
in accordance with the installation instructions.
To Next Page
Loading...
