RMD10 Accessories
15
3Accessories
4 Installing the refrigerator
You find the instructions manual for changing the door stop and the decorative
plate online at:
“dometic.com/manuals”.
The device is suitable for installation in:
• caravans
• motor homes
The refrigerators outlined herein have been design certified by the CSA under the
current edition of ANSI Refrigerator Standard for installation in a mobile home or
recreational vehicle. The certifications are, however, contingent on the installation
being made in accordance with the following instructions as applicable.
In the USA, the installation must conform with:
• National Fuel Gas Code ANSI Z223.1 – (current edition)
• Manufactured Home Construction and Safety Standard, Title 24 CFR, Part 3280
• Recreational Vehicles ANSI A119.2 – (current edition)
In Canada, the installation must conform with:
• Current CSA B 149.1 Natural Gas and Propane Installation Code
• Current CSA Standard Z 240.4 GAS-EQUIPPED RECREATIONAL VEHICLES
AND MOBILE-HOUSING
• Any applicable local code
Description
Seal for draft-proof installation for gaps of 1 – 5 mm (0.04 – 0.2 in.) (fig. 7 B, page 6)
Seal for draft-proof installation for gaps of 5 – 10 mm (0.2 – 0.39 in.) (fig. 7 C, page 6)
Winter cover LS300 for the ventilation grill
Optional Battery Pack R10-BP for stand-alone gas operation
RMD10_INM_US.book Seite 15 Dienstag, 10. Dezember 2019 2:09 14
To Next Page
Loading...
