Dometic RML10.4 - Positioning the Shelves; Positioning the Shelf at an Angle for Wine Bottles; Removing the Freezer Compartment

EN
RML10.4, RML10.4S, RML10.4T Using the refrigerator
31
6.14 Positioning the shelves
!
➤ Remove the shelf as shown (fig. 0, page 10).
➤ Refit the shelf in the reverse order.
Positioning the shelf at an angle for wine bottles
A
➤ Change the position of the shelf as shown (fig. a, page 11).
Removing and inserting the VG fresh base (RML 10.4T only)
➤ Proceed as shown (fig. b, page 11).
6.15 Removing the freezer compartment
You can take out the freezer compartment to make more space in the refrigerator
compartment.
I
➤ Proceed as shown (fig. c, page 12).
WARNING! Children beware!
All shelves are fixed in place to prevent children from climbing into the
refrigerator.
• Only remove the shelves for cleaning purposes.
• Refit the shelves and secure them in place.
NOTICE!
While driving, the shelf in the angled position must not be filled.
NOTE
•
Keep the freezer compartment door and the base in a safe place to prevent
any damage.
•
When installing, replace the parts in the reverse order.
RML10_OPM_WEST.book Seite 31 Mittwoch, 8. April 2020 2:18 14