What to do if my Dometic RML8 does not cool in 12V operation?
If your Dometic Refrigerator isn't cooling when running on 12V, start by checking the on-board fuse and replace it if necessary. Make sure the on-board battery isn't discharged; check it and charge it if needed. Ensure the engine is running. If these steps don't fix the issue, please inform Dometic Customer Service, as the heating element might be defective.
Why Dometic RML8 Refrigerator not cooling in 12V operation?
If your Dometic Refrigerator is not cooling in 12V operation, several factors could be the cause. First, check the on-board fuse and replace it if it's defective. Also, ensure that the on-board battery is not discharged; check the battery and charge it if necessary. The refrigerator will not cool if the engine is not running, so start the engine. If these steps don't resolve the issue, the heating element may be defective, and you should contact Dometic Customer Service.
How to fix Dometic RML8 that does not cool in gas operation mode?
If your Dometic Refrigerator is not cooling in gas operation mode, there are a few things you can check. First, make sure the gas cylinder is not empty and change it if needed. Ensure that the upstream shut-off device is open. If there is air in the gas pipe, switch off the appliance and start it again; repeat this procedure 3-4 times if necessary.
What to do if the Dometic RML8 Refrigerator temperature sensor is defective?
If the temperature sensor in your Dometic Refrigerator is defective, resulting in the refrigerator operating at a mid-temperature setting, you should replace the temperature sensor.
General| Brand | Dometic |
|---|---|
| Model | RML8 Series |
| Category | Refrigerator |
| Language | English |
To Next Page
