RML9330 – RML9435 Installing the refrigerator
19
6.2 Installing the refrigerator in a draught-proof
location
Gas-powered refrigerators in caravans or motorhomes must be installed in a
draught-free location according to EN 1949. This means that the combustion
air is not extracted from the interior and the exhaust fumes are prevented
from directly entering the living space.
A suitable seal must be fitted between the rear panel of the refrigerator and
the interior of the vehicle.
!
The manufacturer recommends using a flexible seal to ease removal and
installation for maintenance purposes.
➤ Attach the sealing lips (fig. 8 1, page 5) to a stop rail behind the
refrigerator, for example, by using an adhesive.
➤ When installing, push the refrigerator against the stop rails with the
sealing lips. This then seals the space behind the refrigerator to the
interior of the vehicle.
WARNING! Fire hazard!
Do not use flammable materials such as silicone sealants, foam
or similar for the draught-proof installation.
To Next Page
Loading...
Need help?
General
