Button A is used for selection of the wanted ener-
gy source; Button B is used for setting the tempe-
rature. Using the gas modus, the ignition is carried
out fully automatically (ticking noise can be heard)
for max. 30 seconds. Operation via electrical ener-
gy is indicated with green, gas operation is indica-
ted with yellow.
5
Operating 2
2.1 Controls
Manual energy selection / manual ignition (RMT 7650, RMT 7850)
A = switch on and energy selection
(Refrigerator)
D = switch for frame heating
B = gas/electric thermostat AC/DC
(Refrigerator)
E = operating display frame heating
C = manual ignition button “Piezo ignition/battery
igniter”
G = Galvanometer
(Refrigerator)
(Refrigerator)
J = switch on / thermostat
(Oven)
DGEA BCJ
Manual energy selection / automatical ignition
MES
(RMT 7651, RMT 7851)
A = switch on and energy selection
(Refrigerator)
D = switch for frame heating
B = gas/electric thermostat AC/DC
(Refrigerator)
E = operating display frame heating
C = operating displays 3 LEDs
(Refrigerator)
J = switch on / thermostat
(Oven)
DEAC B J
Automatical + manual energy selection / automatical ignition
AES
(RMT 7655, RMT 7855)
A = switch on and energy selection
(Refrigerator)
B = gas/electric thermostat AC/DC
(Refrigerator)
C = operating displays 4 LEDs
(Refrigerator)
D = switch for frame heating
E = operating display frame heating
F = temperature setting display
H = dimmer for LED-displays
(only accessable when door opens)
J = switch on / thermostat
(Oven)
EAC
BJ
F
H
To Next Page
Loading...
