The space-saving electronics is mounted directly
behind the front fascia. The LED for status indica-
tion, energy selection switch and temperature re-
gulation are integrated. In conformity with the mo-
dels RMT 7xx1 and
RMT 7xx5 there are electronics for
MES
and
AES
.
The
MES
-electronics does not have contacts for
the D+ and solar signal. The
AES
-electronic is ad-
ditionally equipped with the dimmer.
The equipping of the RMT 7XX0 (piezo)-fridges
differs from the traditional piezo-fridges of the
RM7-series, due to the standard battery-igniter for
gas operation.
A = Energy selector switch (underneath cover)
B = Battery of the oven’s igniter
C = Compact fitting
D = Battery igniter for gasburner of the fridge
6
3
Components / Refrigerator
Typisch AES: 4 LED Kennzeichnung mit Art.-Nr. Codierte Kompaktstecker
All operation modes (DC/AC/GAS) are control-
led thermostatically.
The temperature sensor is fitted at the post
evaporator.
3.2 Electronics/Power module (RMT 7xx1, RMT 7xx5 only)
3.3 Temperature-Sensor / NTC (nur RMT 7xx1, RMT
3.1 Components (RMT 7650, RMT 7850 only)
C
D
B
A
To Next Page
Loading...
