Change of the Mechanical ADC
( for RH356 / RH456 LD E)
12
11.1.1
Pin
(triggers a weight when ope-
ning the door )
ADC - component, complete
The complete component is not screwed in the doorframe but inserted. So without
removal of the door or loosing of screwings the ADC-component can be exchan-
ged.
Press in the mounting
pins and pull out the
component a little bit.
Press in the mounting pins on
the other side as well by
means of a screw driver.....
......and pull out the complete ADC.
To Next Page
Loading...
