Lighting for RH 356LD/LDE and RH 456LD/LDE
The above models are equipped with
separate warm shelf and cooling section
lighting. This lighting mechanism consists
of:
- sensor - switch
- 1 light bulb for warm shelf
- 2 light bulb for cooling section
- Transformer (output voltage 6V)
Pay attention to country-specific vol-
tages for the transformer!
Changing bulbs:
7
1. Pull out the
mains plug.
2. Remove the
reflector disk.
3. Remove the
defective bulb.
4. Insert new bulb.
5.Clip reflector disk back in.
90°
1.
2.
To Next Page
Loading...
