DO7302C-DO7303C
Regulation of the thermostat
By rotating the bottom knob clockwise you can determine the room temperature.
Antifreeze function
Select the desired warmth by choosing 1,2 or 3 dots. Now place the thermostat on the
lowest setting.
The convector will start to work when the room temperature drops below 5°C.
To stop the appliance
Turn both knobs to “0” before removing the plug from the socket.
ASSEMBLY OF THE FLOOR REST AND WALL BRACKETS.
Place the oor rest (large grey hooks) in the central holes on the bottom of the unit.
For the wall brackets: attach the small metal hooks to the wall. Now you can attach
the convector to the wall with the small long holes at the back of the unit, the oor rest
will now serve as extra support.
To Next Page
Loading...
Need help?
General
