7
FITTING THE ACCESSORY TOOLS - CONTINUED
The floor brush cotton cloth can be fitted to the floor brush if a softer surface
is required for cleaning.
To fit a floor brush cotton cloth, first press and hold down the cotton cloth
retaining clip on one side of the floor brush.
Position one side of the floor brush cotton cloth under the retaining clip.
Release the retaining clip.
Wrap the floor brush cotton cloth over the bristles and then secure the end
of the pad under the retaining clip on the other side of the floor brush.
The fabric brush cotton cloth can be
fitted to the fabric brush if a softer
surface is required for cleaning.
To fit the fabric brush cotton cloth, pull it
over the fabric brush.
To Next Page
Loading...