Need help?Do you have a question about the Dong-Do IM-2DT and is the answer not in the manual?
General| Type | Digital Multimeter |
|---|---|
| Diode Test | Yes |
| Continuity Test | Yes |
| Operating Temperature | 0°C to 40°C |
| Power Supply | 9V Battery |
| DC Voltage Ranges | 200mV, 2V, 20V, 200V |
| AC Voltage Ranges | 200V |
| DC Current Ranges | 200μA, 2mA, 20mA, 200mA, 10A |
| Resistance Ranges | 200Ω, 2kΩ, 20kΩ, 200kΩ, 2MΩ |
| Measurement Range | As per voltage, current, and resistance ranges |
| Dimensions | 126mm x 70mm x 24mm |
| Display | 3.5 digit LCD |
| Accuracy | ±(0.5% + 2 digits) for DC Voltage |
Describes the functions of the master button for power control, flash activation, and touch pad calibration.
Explains the functionality of different sections on the touch pad, including menu access and value changes.
Details the structure and available options within the device's main menu interface.
How to exit the main menu and return to the primary measuring screen.
Instructions on changing the display mode of the inclinometer.
Explains screen elements and data displayed during operation in Flat mode.
Procedure to configure specific settings for the FLAT mode operation.
Step-by-step guide for calibrating the absolute zero of the inclinometer for accurate readings.
How to change the number of input data rows to be averaged for stability.
Adjusting display settings like brightness, display off time, and line width.
Detailed instructions on how to perform touch pad calibration.
Settings for RS232C serial output, including polling modes and device ID.
Procedure to save configuration changes or discard them by powering off.
Accessing information about the manufacturer of the device.
Explains the application of FLAT mode for adjusting 4-leg machines and setting planes.
Essential parameters to configure before using the FLAT mode for accurate measurements.
Details the ASCII communication protocol, including baud rate, parity, data, and stop bits.
Explains how to call the device in master mode to receive data via RS232C.
Lists core system specifications such as model, measuring range, resolution, and accuracy.
Information on charging and RS232C connectivity ports.
Details power source, operation time, charging, LCD, size, weight, and environment.
Recommendations for conserving battery life by adjusting screen and power settings.
To Next Page