Electric System
EL-6
Battery
Specifications
Check
1.Electrolyte density when fully charged: 1.26~1.285g/
cm³
① Density meter
② Floater
2.Fill distilled water in time if the electrolyte is found
insufficient. Charging for over half an hour after filling
in order to let the filled distilled water fully fix with the
former electrolyte.
Electrolyte level (above the top of the battery plate)
15~20mm
① Battery plate ② Electrolyte
Battery Two batteries 6-QW-90DF are in series
Type Less maintenance
Nominal voltage (V) 12
Nominal capacity (A · h) 165
To Next Page
Loading...