Transmission
MT-5
Transmission output shaft and gear
1.Conical disc--4th, 5th gear synchronizer
2.Balking ring assy--4th, 5th gear synchronizer
3.Balking ring--4th, 5th gear synchronizer
4.Lockpin--4th, 5th gear synchronizer
5.Locating pin--synchronizer
6.Steel ball
7.Lockpin spring
8.Slide gear sleeve--4th, 5th gear
9.Fixed toothholder lock ring
10.Fixed toothholder thrust ring
11.Fixed toothholder--4th, 5th gear
12.Needle bearing
13.4th gear
14.4th gear shaft sleeve
15.4th gear thrust ring
16.3rd gear
17.3rd gear needle bearing
18.Conical disc--3rd gear synchronizer
19.Balking ring assy--2nd, 3rd gear synchronizer
20.Balking ring--2nd, 3rd gear synchronizer
21.Lockpin--2nd, 3rd gear synchronizer
22.Slide gear sleeve--2nd, 3rd gear
23.Transmission output shaft
24.2nd gear
25.Needle bearing--2nd gear
26.Thrust clip--1st gear
27.Thimble
28.1st gear
29.Needle bearing--1st, reverse gear
30.Slide gear sleeve--1st, reverse gear
31.Fixed tooth holder--1st, reverse gear
32.Reverse gear shaft bush
33.Driven gear--reverse gear
34.Thrust ring--output shaft rear bearing
35.Rear roller bearing--output shaft
36.Driven gear--odometer
37.Steel snap ring for shaft
38.Drive gear--odometer
39.Spacer sleeve--output shaft rear bearing
40.Saucer spring
41.Lock nut--transmission flange
42.Circlip for shaft
43.Spacer
To Next Page
Loading...