Front Axle
FA-3
Maintenance
Before using new axle, apply enough 2# lithium grease into every grease fitting.
First maintain
To assure the safe running of your vehicle and obtain a long service life, you have to do the first maintain
after the first 1,500~2,500kmafter leaving factory. Please note the following items:
1.Dismantle and check the wheel hub for any abnormal wear (please go to the Assembly and Adjustment to see
the reference)
2.Check the fastening piece.
Periodical maintain
Do the periodical maintain for the vehicle is a good way to prolong the service life and assure the safe run-
ning of the vehicle. If you follow the maintenance schedule to do the maintain, your vehicle may obtain the best
economic benefit.
The items of the periodical maintain are as following:
1.Add some grease to the grease nipple
2.Avoid important nut loosed
3.Adjust wheel hub bearing pretightening force and toe-in
4.Adjust the brake clearance
Periodical Maintain Schedule
Item
Maintenance Interval Mileage ( × 1000km)
First maintain 4 8 12 16 20 24 28 32 36 40 44 48 80
Clean the axle assy
●●●●●●●●●●●●
Check the important nut for its tightness
● ●●●●●●●●
Clean and adjust wheel hub bearing
●●●●
Check service brake and park brake
efficiency
● ●●●●●●●●●●●●
Check the brake bottom plate for tightness
●●● ● ●
Clean the brake air chamber
●
Check brake pipeline for leakage
● ●●●●●●●●●●●●
To Next Page
Loading...