Front Axle
FA-6
Steering wheel heavily
manipulated
Improper adjustment of the wheel
alignment
(too big caster) Check and adjust
Too big clearance between kingpin and
bush
Check and adjust the clearance
Thrust bearing installed on the contrary Correct the installation
Front axle lacks of lubricating Add some grease
Ball connecting overtighten or too loose Check and lubricate ball head pin
Pendulate
Front wheel hub bearing worn Replace wheel hub bearing
Kingpin and bush overworn Correct or replace troubled parts
Steering knuckle distortion Replace
Improper wheel alignment Check and adjust
Pulling to one side
Improper wheel alignment Check and adjust
Front axle bent Correct or replace
Brake unsmooth See the relative brake items
Front wheel hub bearing nut loosed Tighten accord to the required torque
Tire unevenly worn or
earlier worn
Improper wheel alignment Check and adjust
Wheel hub bearing worn or damaged Replace wheel hub bearing
Bearing nut loosed Tighten accord to the required torque
Ball pin, kingpin and bush overtightened or
slackened
Correct or replace the troubled parts
To Next Page
Loading...