Suspension
SP-4
Disassembly
Clean the suspension system before disassembling. Set the truck in brake state, and block up the front and
rear wheel with wooden stand.
Dismounting of front suspension
1.Wedge the rear wheel, lift the front axle and front part of
the frame with a jack and the safety support, then take
down the front wheel;
2.Unscrew the set nut from the lower end of the front
damper, dismantle the front damper lower end, and take
off the related parts.
3.Loosen the set nut from the upper end of the damper, dis-
mantle the front damper upper end, and take off the front
damper.
4.After loose U-bolts and nuts, remove the U-bolt, cover
board and limit block;
5.Down the front axle by loose the jack and then the leaf
soring is in a free condition;;
6.Remove the spring rear end, loose the lifting pin fasten
nut at the lower end, tahe down the lifting pin and the
leaf spring rear end can be removed;
1.Front damper assy
2.Damper bracket assy
3.Damper lower pin
To Next Page
Loading...