DongFeng DFA1063DJ10-301 - Disassembly

Suspension
SP-5
7.Remove the fixed bolt of the leaf spring front enf spring
pin, then take down the leaf spring pin and let down the
jack and take out the leaf spring;
8.Loose the lifting eye locking nut, and take down the lift-
ing eye pin and you can remove the lifting eye.
Disassembly of the rear suspencion
1.Wedge the front wheel, lift the rear axle and rear part of
the frame with a jack and the safety support, then take
down the rear wheel;
2.Unscrew the set nut from the lower end of the damper,
and take off the related parts;
3.Loosen the set nut of the damper pin from the upper end
of the damper, remove the related parts, and take down
the damper;
4.Loose the U-bolts and nuts, remove U-bolt underplate, U-
bolt and cover board;