Structure and Operation
D760.H03E-001.H1907 105
Lane departure warning (LDW)
Please refer to the specific configuration of the purchased model.
CAUTION:
The lane departure warning (LDW) function only serves as a reminder
and the driver is always responsible for the condition of the vehicle.
Turn the key switch to "ACC" and the lane
departure warning function will be turned on
automatically. The switch on the right side of the
dashboard can control the function to be turned
off or on.
In the process of vehicle driving, based on
the image collected by the front view camera,
the lane departure warning function can identify
the current visible lane line and send an alarm
message to remind the driver when the vehicle
has an unconscious lane departure.
1. When the vehicle speed is less than
50km/h, the LDW function is in standby state
and will not send alarm; When the vehicle speed
is ≥ 50km/h,
LDW function is activated to detect the cur-
rent visible lane line in real time.
2. LDW alarm prompt includes sound alarm
and indicator alarm icon flashing prompt.
3. The color of lane line supported by LDW
function includes white and yellow; When only
one lane line exists, this feature supports only
pairs of lanes
Alarm on one side of the line; And LDW
function is suitable for standard lane with road
radius ≥ 250m.
4. When the following conditions exist, the
LDW function alarm will be suppressed, and the
function cannot issue the alarm.
a). Quick line change and continuous line
change;
b). The turn signal corresponding to the
lane departure direction is in the state of
being turned on;
Lane departure alarm icon (left)
Lane departure warning icon (right)
To Next Page
Loading...