EasyManua.ls Logo

DongFeng DFH4180 Series - Front Face Shield

DongFeng DFH4180 Series
251 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Fuse box
D760.H03E-001.H1907 127
After using the towing hook, reinstall its pin cover properly by the steps opposite
to the above.
CAUTION:
1.The front towing hook of the vehicle
is only used under the normal
driving road surface. If the vehicle
is equipped with two front towing
hooks, double towing hooks must
be used to ensure that the force of
the double towing hooks is
uniform.
2.When using the front towing hook,
it is required that the tractor must
remove the trailer; Trucks and
engineering vehicles shall be
empty as much as possible(or the
weight shall not exceed the rated
load mass).
Front Face Shield
Opening of front face shield
1. Pull the primary lock handle under the
driver's side instrument panel in the cab to
unlock the primary lock;
1. Towing hook
1. Primary lock handle of face shield

Table of Contents