Fuse box
D760.H03E-001.H1907 149
Operation instructions for installing upper cover plate of fender:
1. Align the upper cover plate with the
fender.
2. Insert the rubber band into the limit
hole of the fender.
3. Clamp the end of rubber band with
pliers, and stretch the rubber band
along the direction of arrow a.When
the pliers are clamped and stretched,
press the rubber band down (direction
b) into the fender clasp to tighten. At
this point, the rubber band clamping
operation is completed, and other
rubber band can be repeated.
1. Upper cover plate
2. Rubber band
To Next Page
Loading...