Maintenance & Adjustment
202
D760.H03E-001.H1907
Front combination lamp
1. Daytime running lamp
2. Front position lamp
3. High beam
4. Low beam
5. Front turn signal lamp
Rear combination lamp
1. Left rear end-outline marker lamp
2. Left rear turn signal lamp
3. Left brake lamp
4. Left position lamp
5. Left rear fog lamp
6. Left reversing lamp
7. Side retroreflector
8. License plate lamp (only for left rear
combination lamp)
9. Side marker lamp
The right rear combination light is weighed
relative to the left.
Lamplight Adjusting Method
Front combination lamp
Structure description: reflector of front com-
bination lamp assembly is the low/high beam
combined reflector, which is regulated through
adjusting screw and light adjusting motor (man-
ual adjusting section). Lamplight adjustment
should be done strictly in accordance with the
figure.
1. Rotate the adjusting screw clockwise, and
the reflector will move leftward; rotate the
adjusting screw anticlockwise, and the
reflector will move rightward.
2. Rotate the light adjusting motor (manual
adjusting section) clockwise, and the
reflector will move downward; rotate the light
adjusting motor (manual adjusting section) anticlockwise, and the reflector will
move upward.
1. Adjusting screw
2. Light adjusting motor
To Next Page
Loading...