DongFeng DFH4180 Series - Regular Maintenance Schedule; Inspection and Maintenance Term

Regular Maintenance Schedule
208
D760.H03E-001.H1907
Regular Maintenance Schedule
The regular maintenance schedule of this manual is the general maintenance
schedule, please refer to the specific vehicle configuration when using. Disassembly
of large assembly shall be carried out as required to facilitate maintenance of the tech-
nical status of the vehicle.
This table interval is only for standard working conditions, and the maintenance
interval for severe working conditions is halved.
Cummins engine maintenance plan shall be carried out in accordance with this
manual. Please also refer to the cummins engine operation and maintenance manual
brought with the vehicle.
Please refer to the specific configuration of the purchased model.
Inspection and Maintenance Term
This maintenance schedule shows the inspection and maintenance items and
term of the first cycle; for the second cycle, the maintenance items are the same
except the running-in maintenance is not required. The inspection and maintenance
term is expressed in the driving mileage and/or months whichever comes first. The
user should carry out the maintenance according to the maintenance parts and inter-
val mileage or months strictly.
CAUTION:
When performing the vehicle maintenance in accordance with the speci-
fied maintenance items, the user should shorten the maintenance inter-
val mileage and add the required maintenance items according to the
vehicle functions and local operating conditions, to ensure more reason-
able maintenance and better performance of your vehicle, however, the
user should never extend the maintenance interval mileage.
The relevant definitions in the maintenance schedule are as follows:
1. Project classification: divided into three categories.
The first category is the replacement category item.
The second category is inspection/cleaning/discharge items
The third category is lubrication items
User self-inspection items, except the first guarantee and inbound maintenance
items, the daily or regular inspection, cleaning and lubrication items are user self-
inspection items. Grease replenishment and replacement shall be performed at a
technically qualified service station or facility.
2. First guarantee: the mileage unit of maintenance is 10,000km/month, which-
ever comes first;
3. Inbound maintenance interval: the mileage unit of maintenance is 10,000km/
month, whichever comes first;