Regular Maintenance Schedule
D760.H03E-001.H1907 219
Maintenance lubrication items
Maintenance and replacement
items
Running-
in mainte-
nance
The first
confirmed
(10,000 km/
month)
Inbound mainte-
nance interval
(10,000 km/month)
User mainte-
nance interval
(10,000 km/
month)
Grease is added to front axle,
middle and rear axle air chamber
support, brake floor and brake
adjusting arm
— —
5/3 2/1
Grease on the knuckle kingpin
and steering lever
— —
5/3 2/
Maintenance-free wheel end
lubrication
— —
50/36 is suitable for
independent oil
chamber
(FAG)
—
— —
Synchronous
replacement with the
axle gear oil, suit-
able for connecting
the oil chamber (and
the rear axle gear oil
chamber)
—
Maintainable hub bearing grease
replacement
— —
5/3 Per month
Before and after the plate spring
pin, lifting lug pin, balance bear-
ing hub (if there is a nozzle)
grease
☆
—
5/3 2/
Grease (if grease nozzle)
— —
5/3 2/
Grease is added to the surface of
the saddle shell, the contact
between the saddle and the trac-
tion pin and the lubrication hole of
the support
☆
—
5/3 —
Saddle lock, wedge, arc bearing
plate grease
— —
5/3 —
Lubricated cab front suspension /6 2/
After turning the lock mechanism
in the cab, grease is added to the
suspension latch
— —
/6 2/
Front mask movement and lock
teeth meshing part, spring posi-
tion lubrication
— —
10/12 Per month
To Next Page
Loading...