Service & Adjustment Data
D760.H03E-001.H1907 221
Service & Adjustment Data
Engine
Please refer to the attached Operation and Maintenance Manual of Cummins
Engine for relevant data.
Chassis
Please refer to the specific configurations of your vehicle.
Free stroke of steering wheel 15°
Toe-in 1-3mm
Brake pedal free travel 12-18mm
Push rod stroke of front and rear brake chambers Manual adjuster 20~30mm
Clearance between front/rear brake shoe and brake drum (in the
middle of brake shoe)
Manual adjuster 0.3~0.5mm
Tensile force after adjustment of front hub bearing (at the tire nut) 25-55N
Tensile force after adjustment of rear hub bearing (at the tire nut) 29-88N
Differential bearing pre-tightening
load (excluding the pre-tightening
load of driving bevel gear bearing)
At driven gear bolt 68-78N
Pre-tightening load of driving gear
bearing (at coupling flange bolt
holes for rear axle)
Excluding oil seal resis-
tance
20-44N
Including oil seal resistance 30-60N
Clearance between driving and driven gears of final drive 0.3-0.4mm
Differential gear backlash
Dongfeng 460 axle 0.25-0.33mm
Dongfeng 435 axle 0.25-0.33mm
For Dongfeng 300 wheel
reducer
0.18-0.23mm
Dongfeng 500 axle 0.25-0.45mm
Fore-and-aft adjustment angle range of steering wheel 32°
Upward and downward adjustment distance of steering wheel 50mm
To Next Page
Loading...