Structure and Operation
D760.H03E-001.H1907 43
Axial load and ambient temperature: if there is
an axial load display function, the axial load (driv-
ing shaft) will be displayed for 10 seconds after
power on, and then the ambient temperature will
be displayed.
1.
2. Speed, fault code, reminder, etc. : text and
icon display, used for fault alarm and prompt
display, multiple simultaneous triggers,
according to the priority display.
3. Air pressure in the front circuit, air pressure
in the parking circuit and oil pressure: long
press the return button for 1~3 seconds.
When releasing, the picture column will be
switched.
4. Total mileage and subtotal mileage: short
press return button <1s, switch when releas-
ing, display range of subtotal mileage is
0~9999.9km.
5. Instantaneous fuel consumption and subtotal
fuel consumption:
A. The total mileage + urea level is dis-
played on power, and the return button can be
cut to the total mileage + instantaneous fuel con-
sumption, subtotal mileage + subtotal fuel con-
sumption;
B. Automatically switch to total mileage +
instantaneous fuel consumption after engine
start, only cut once; You can still loop through
using the return button.
6. Air pressure and battery voltage in the back
circuit: long press the return key 1~3s, switch
the diagram column when releasing, and the
display range of urea level is 0~100% with an
accuracy of 1%; Battery voltage display
range 12~32v, accuracy 0.1v.
To Next Page
Loading...