Front suspension
FA-16
Front Independent Suspension
When assembling the rubber part, the final tightening has to be under such condition: wheel on the ground,
no load.
Condition of no load: with full fuel, coolant, engine lubricant, and the spare tyre, jack, driver tool on the
vehicle, and the vehicle park on the level position.
1.Shock absorber assy
2.Upper arm shaft
3.Inner side washer
4.Rubber bush assy
5.Big washer
6.Upper transverse arm
7.Bolt
8.Round head pin assy
9.Front suspension cross member assy
10.Circlip for holes
11.Torsion bar adjusting arm
12.Adjust bolt
13.Round head
14.Front torsion bar spring
15.Torsion bar fixing bar
16.Lower arm shaft
17.Lower transverse arm assy
18.Rubber bush assy
19.Limit block assy
20.Bolt
21.Rubber bush assy
22.Round head pin assy
23.Bolt
24.Propelling rod
25.Big washer
26.Rubber bush
27.Spacer sleeve
To Next Page
Loading...