Profeller Shaft and Differential
PD-6
Check the Axial Freedom Degree of Cross Axle
Replace the cross axle of profeller shaft if it's axial
fredom degree exceeds the limited degree.
Axial fredom degree amount refers to Maintainance
data and Explaination.
Disassembly
Disassembly cross axle.
1. Mark the profeller shaft and flange yoke.
2. Disassembly the clip.
3. Knock the flange yoke with a hammer. Be careful
to avoid damaging the cross axle and the hole of flange
yoke when disassembly the cross axle bearing.
To Next Page
Loading...