-
112
-
When Driving
3
CAUTION
● When the conditions for switching
gears are not met, the gear display
on the instrument panel flashes with
corresponding prompt messages.Follow
the prompts for operation.
● Switch to P or R gear only when the
vehicle is stationary.
● When the gear is in R/N/D, press the P
gear button to switch to P gear.
● When the READY indicator on the
combination instrument panel is
illuminated, all gears can be switched;
when it is not illuminated, only P and N
gears can be switched.
● Do not coast in neutral while driving,
as it may damage the vehicle or cause
danger.
Electronic Gearshift Operation Instructions
After the READY indicator on the
combination instrument panel is illuminated,
depress the brake pedal and toggle the electronic
gearshift up or down to switch gears.
R Gear:Reverse Gear
Switch to this gear when the vehicle needs
to reverse.
With the vehicle stationary, depress the
brake pedal and push the electronic gearshift
lever upwards.The vehicle enters R gear, and "R"
is displayed on the instrument panel.
N Gear:Neutral Gear
Switch to this gear for a temporary stop,
with "N" displayed on the instrument panel.
● In Dgear, pushthe electronic gearshiftlever
upone gear.
● In Rgear, pushthe electronic gearshiftlever
downone gear.
● In Pgear, depress the brake pedal and push
theelectronic gearshiftlever up or downone
gear.
D Gear:Drive Gear
Switch to this gear when the vehicle needs
to move forward.
With the vehicle stationary, depress the
brake pedal and push the electronic gearshift
lever down two gears.The vehicle enters D gear,
and "D" is displayed on the instrument panel.
The vehicle has four gears:P, R, N, D.
P Gear: Parking Gear
Switch to this gear when the vehicle needs
to be parked.
With the vehicle stationary, depress the
brake pedal and press the P gear button at the
end of the electronic gearshift lever.The vehicle
enters P gear, and "P" is displayed on the
instrument panel.
Driving Guide
Gearshift Control
Gear Display
Gears
To Next Page
Loading...
