-183-
Emergency Situations
6
Triangular Warning Sign
The triangular warning sign is stored under
the foam pad A beneath the trunk floor
A
.Lift
the trunk oor handle and open the trunk oor to
access it.
According to legal regulations, when a
vehicle cannot leave the driving lane due to a
breakdown, accident, or other reasons, or when
parking on the shoulder, the hazard warning
lights must be turned on, and a triangular
warning sign should be set up in the direction of
oncoming trafc to alert following vehicles.
After use, fold it back in the reverse order
and store it properly.
When folding it back, apply force on the
upper area of the two reflector plates. Slightly
force the side with the reflective material to
easily separate the two reector plates and avoid
damage.
Ordinary
Roads
Highways
Placement
Distance L
50~100m ≥ 150m
1. Open the four base supports
1
;
2. Open the two folding sides of the reector
2
and
3
and lock the top end;
3. During use, place the base on the ground
and position the side with reective material
facing rearward.
Use of the Triangular Warning Sign
Storage Location of the Triangular Warning Sign
How to Deploy the Triangular Warning Sign
Placement Distance of the Triangular Warning Sign
CAUTION
When placing the triangular warning sign,
ensure the side with reective material faces
rearward.
L
A
1
2
3