-195-
Emergency Situations
6
1. If the rescue vehicle's 12V battery is far from
the faulty vehicle's battery, park the vehicles
closer to each other.
2. Engage the parking brake and put the gear in
“P”.
3. Power down the vehicle and turn off all
electrical devices (such as lights, heating, air
conditioning, etc.).
4. Cover the 12V battery with a dry cloth to
reduce the risk of explosion.
5. Connect the red positive jumper cable as
shown
1
→
2
. Be careful to avoid short
circuits.
6. Connect the black negative jumper cable as
shown
3
→
4
. Be careful to avoid short
circuits.
7. Start the faulty vehicle in the normal way and
illuminate the READY light.
8. After starting the faulty vehicle, carefully
disconnect the jumper cables in the reverse
order of connection.
9. Properly dispose of the dry cloth to avoid
pollution.
Steps for Jump Starting
A
: Faulty Vehicle's 12V Battery
B
: Rescue Vehicle's 12V Battery
Jump Starting
-
3
1
B
2
A
+
+
4
-
To Next Page
Loading...
