-
22
-
Safety
1
CAUTION
● Before fastening the seat belt, rst adjust
the seat's position and the backrest angle
to a suitable position.
● The seat belt should be as tight as
possible, as a loose seat belt greatly
reduces its protective effect.
Introduction to Seat belts
Seat Belt Locking
Slowly pull out the seat belt from the
retractor, then insert the tongue into the buckle
until you hear a "click" sound. Pull back on the
seat belt to ensure it is securely locked.
Each seat in this vehicle is equipped with a
three-point seat belt.
Front Seat Belts: Load-limited belts with
pre-tensioners.
Rear seat belts: Standard seat belts.
The driver's seat belt is equipped with a
not-fastened reminder feature, and the front
passenger seat belt may be equipped with a not-
fastened reminder feature. All occupants must
properly wear seat belts every time they ride in
the vehicle.
Seat Belt Adjustment
Gently pulling the seat belt allows for
adjustment of its length, enabling occupants to
nd a suitable position on the seat.
First, fasten the lower part of the seat belt
lower across the hips, then pull up the upper
part of the seat belt to ensure the lower part ts
snugly against the body. This way, the sturdy
pelvic bone can withstand greater impact forces,
reducing the chance of abdominal injuries.
Seat Belt
To Next Page
Loading...
