-
71
-
Before Driving
2
CAUTION
After adjusting the seat, shake it back and
forth to confirm it's securely locked. An
unsecured seat may suddenly move during
driving, leading to loss of control.
Backrest Angle Adjustment
1. Lift the front end of handle
2
and hold;
2. Adjust the backrest to the desired angle;
3. Release handle
2
and rock the backrest
back and forth to conrm it is fully locked.
● The designated position for measuring
seat cushion depth is 20mm forward from
the rearmost position, with a total forward
and backward travel of 260mm.
● The backrest angle is designed to adjust
up to 22°.
NOTE
Seat Adjustment
Power Seat Adjustment*
Forward and Backward Position Adjustment
Move forward: Push the switch forward
1
;
Move backward: Push the switch backward
1
.
Seat Height Adjustment
Raise: Lift the rear end of switch
1
;
Lower: Press the rear end of switch
1
downwards.
Backrest Angle Adjustment
Tilt Forward: Move the upper end of switch
2
forward;
Tilt Backward:Move the upper end of switch
2
backward.
WARNING
!
● Never adjust the driver's seat while the
vehicle is in motion! Unexpected seat
movement can lead to loss of vehicle
control and distraction, causing severe
accidents.
● Sitting too close to the dashboard can
significantly reduce the effectiveness of
seat belts and airbags in an accident,
leading to serious injuries.
● If the seatback is reclined too far back,
the seat belts and airbag system will not
provide the expected level of protection.
For instance, during braking or in the
event of an accident, you may slide
under the seat belt, which could result
in abdominal or neck injuries. This could
increase the risk of causing injury or even
fatal harm.
1 2
To Next Page
Loading...
