DongFeng Nammi 01 - Windshield Wipers and Washer

-
86
-
Before Driving
2
Rotate the wiper combination switch to the
short intermittent wiping position; the front wiper
operates at a longer intermittent frequency.
Rotate the wiper combination switch to the
short intermittent wiping position; the front wiper
operates at a shorter intermittent frequency.
Rotate the wiper control switch to the low-
speed mode position, and the front wipers will
operate in low-speed mode.
Rotate the wiper control switch to the high-
speed mode position, and the front wipers will
operate in high-speed mode.
Rotate the wiper control switch to the O
position to turn off the front wipers.
Long Intermittent Wiping
Short Intermittent Wiping
Low-Speed Continuous Wiping
High-Speed Continuous Wiping
Turn off the Wipers
CAUTION
● Do not operate the windshield wipers
if they are obstructed by snow or ice.
Instead, activate the windshield defrost
function to heat the windshield and
remove snow or ice from the wiper arms
and surrounding areas before using the
wipers.
● If there are stains on the windshield after
being wiped by the wipers following an
automatic car wash, it could be due to
wax or other residues. After washing the
vehicle in an automatic car wash, clean
the windshield with windshield washer
uid.
● Do not operate the windshield wipers
on a dry windshield as dry wiping can
damage the wiper blades. Additionally,
accumulated dirt on the windshield can
scratch the glass.Always spray water
before wiping.
Windshield Wipers and Washer
Windshield Wipers and Washer
1
O: Turn off the Wipers
2
Long Interval Wiper Mode
3
Short Interval Wiper Mode
4
Low-Speed Continuous Wiper Mode
5
High-Speed Continuous Wiper Mode
6
Front Windshield Washer Button - Light
press for a single wipe, deep press for spray and
wipe
6
1 2 3 5 4