Introduction
X-431 automobile diagnostic platform(DFPV
Diag. for short) is a newly developed special
automobile diagnostic computer. Including all
the advantages of its predecessor, DFPV Diag.
is designed to cover diesel and gas-fueled
vehicle models of 12V&24V voltage.
It featured ergonomic design, compact structure,
convenient use and strong expandability.
Features
No need for battery conversion when
testing 24V trucks.
Fast upgrading via the internet to keep up
with the latest vehicle models.
International design to adapt to all
diagnostic sockets.
Including all the electronic control system.
Unique data transfer to ensure fast
operation.
Connection with PC to keep service
records through optional X431
PCCENTER.
Large compact flash memory for data
storage.
CAN diagnostic adaptor for CANBUS
models.
Precaution on Operation
Do not insert and pull out CF card too
frequently. Press ejector button before
pulling out the CF card. Insert the CF card
into the CF card slot, keep the face
labeled “UPSIDE” upward, and make
sure the card is fully seated.
Handle with care. Avoid hitting. Unplug the
power after operation.
Put the stylus into the hole of DFPV Diag.
handle after operation. And put the cables,
connectors and other accessories into
box.
Hold the connector when plug or unplug it.
Do not pull the cable for unplugging.
Maintenance
Storage
Store the DFPV Diag. on a flat and dry
place with suitable temperature.
Never put the DFPV Diag. in direct
sunlight or near the heating source.
Prevent smoke, water and oil from
entering the DFPV Diag..
Avoid shock, dust, moisture and extremely
high temperature.
Do not disassemble the main unit. Clean
the outside surface and screen with soft
cloth that is dipped with a little water if the
main unit is dirty. This should be done
after the machine is turned off and the
power cable is removed.
Periodically turn on the DFPV Diag. main
unit if it is not operated for long time to
avoid moisture.
Take Care of the Screen
Turn off the power if it is expected not to
operate the DFPV Diag. for a long while. It
can extend the life of screen and save
energy.
Do not put anything on the main unit to
avoid damage to the internal parts.
Use the equipped stylus to click the
screen. Do not use fingernail or other
sharp object to touch the screen.
Dust may be accumulated on the LCD
screen owing to electrostatic. It is
suggested to buy the special LCD screen
wiper to clean the screen gently. Do not
wipe the screen with bare finger.
To Next Page
Loading...