Donner B1 - B1 ANALOG BASS SEQUENCER SPECIFICATION; Synthesizer Architecture; Connectivity and USB; Inputs and Outputs

B1 ANALOG BASS SEQUENCER SPECIFICATION
Synthesizer Architecture
Number of voices
Type
Oscillators
VCF
Envelopes
Connectivity
Power switch
Power input
MIDI IN/OUT
USB (MIDI)
Outputs
Output impedance
Headphones
Headphones output impedance
USB
Type
Inputs and Outputs (TS 3.5 mm)
Inputs
Supported Operating Systems
Power Requirements
External power adaptor
(use only the supplied adapter)
Power consumption
Environmental
Operating temperature range
Physical
Dimensions (H x W x D)
Product Net Weight
Shipping Weight
Monophonic
Analog
1
1 low pass
1
Slide switch on/off
DC input connector
MIDI In and MIDI Out, 5-pin DIN
USB 2.0, type C
Line output: 1/4" TRS, unbalanced, max. +16 dBu
1.5 kΩ
3.5 mm TRS, max. 125 mW@32 Ω
10 Ω
Class compliant USB 2.0, type C
AUX in: maximum input +5 dBu
Sync in: More than 2.5 V
Windows 7 or higher / Mac OS X 10.6.8 or higher
9 VDC 500 mA inner positive
2.25W maximum
5°C – 40°C (41°F – 104°F)
54*323*130mm (2.1 x 12.7 x 5.1")
0.66kg(1.45 lbs)
1.02kg(2.25 lbs)
01 02 03 04 05 06 07
08 09 10 11 12 13 14 15
16 17
18
19 20 21 22 23 24 25
26 27 28 29 30 31 32 33
34 35 36
37 38 39 40 41 42 43
44 45 46 47 48 49 50 51
52 53 54
55 56 57 58 59 60 61
62 63 64 65 66 67 68 69
70 71 72
73 74 75 76 77 78 79
80 81 82 83 84 85 86 87
88 89 90
91 92 93 94 95 96 97
98 99 100 101 102 103 104 105
106 107 108 109