EasyManua.ls Logo

Doohan iTank DH01 - Tire Inspection

Doohan iTank DH01
43 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16
3If the brake pads are abraded, and the brake fluid does not exceed the limitation, usually it
indicates that oil leak exists. Please seek check and repair service from maintenance station.
4Brake oilDOT3 or DOT4
Notice: Once you need to maintain brakes, drivers should ask for the handy special maintenance
department who is responsible for the maintenance and inspection of motorcycles. All special
maintenance departments have trained technical personnel responsible for maintenance and repair. The
motorcycle parts can only be changed with real original parts of the company.
Tires
The tire pressure should be inspected and adjusted routinely.
Check the tire pressure only after cooling tires.
Check often whether there are punctures in tires, especially tires need to be repaired immediately
when tire air leakage occurs.
Check whether there are shear marks, implant iron nails or other sharp objects in tire surfaces.
Check whether or not the indentation, indenture or distortion of rims exists. If any damage has
been caused, please contact the maintenance departments to check.
If the tire tread patterns are worn to tread wear indicators, new tires should be required for
changing.