21
7. Charging
Motorcycle charging
① Open the motorcycle charging port by turning the cover, insert the charging plug into recharge
socket until you hear “click” which means that the charging plug has connected with the socket, then
connect the charger’s input with electric supply. The indicator light turns green to red means it starts
charging and on the contrary, it is fully charged.
② The instrument can display the current electric quantity when turn power on while charging.
③If the scooter's large current causes the overheat protection of battery, you can't charge the battery by
connecting the charging port in the scooter at this time, the battery will be charged when the
temperature is down.
Extra position charging
① Open the batteries compartments (see specific methods in graphic illustration set forth above)
② Take the batteries out from the motorcycle.
③ Insert the charging plug into recharge socket until you hear “click” which means that the charging
plug has connected with the socket, then connect the charger input with electric supply. The indicator
light turns green to red means it starts charging and on the contrary, it is fully charged.
To Next Page
Loading...