26
and rain, lest the corrosion of motorcycle body or rotating parts; using in rainy day, the wheel hub
should not be covered above axle centerline, lest motor is broken down with water flowed in.
⑹ Please scrub the motorcycle, clear the surface of motor and other parts and keep clean; do not
scour the electric parts and drive parts with water directly.
⑺Try to avoid parking the motorcycle in the place with direct sunshine, high temperature and moist or
parking outside in rainy day; moreover, protect the govern handle, battery holder and control box.
Provided any of above situations occurred, please try turning to ensure its normal prior to ride.
⑻The front fork, epipodium and backshaft components should be lubricated (grease) regularly at least
once a year and brake cables of front and back should be lubricated frequently to insure its dexterity.
⑼ Check before driving.
It is required to check the following items, which are very important, before driving the motorcycle.
⑽Battery switch box for low signal power consumption.
1) when one of the batteries is protected.
2) when there is only one battery in the system and the current is greater than 2A.
3) when there are two batteries in the system and the battery capacity is less than 20%.
4) when there are two batteries in the system and the battery voltage of two batteries
is less than 53V, because the battery is close to full discharge.
Battery switch box (BMS) will be given a reduced power consumption instruction to the
To Next Page
Loading...