Doohan iTank DH01 - Fault Diagnosis and Solutions

31
Reference Disposal Method for Common Fault
Fault
phenomenon
Fault cause
Elimination methods
Turn power on,
but the entire
motorcycle has
no power output
1． Battery plug isn’t inserted properly;
2． Key switch is breakdown;
3． Batteries run out.
4． Battery is breakdown
5．Blown fuse
1．Remove the key and reinsert
the plug.
2．Replace electric door lock
3．Charge the batteries
4．Replace battery
5．Replace fuse
Turn power on
and twirl the
governor handle,
but the motor
cannot start
1．Low battery voltage
2． Half-hold the bake crank lead to
activation of outage switch.
3．The motorcycle is not started.
4．The kickstand is not pulled.
5．The governor handle is not reset.
6 ． The fault-indicating lamp is
flickering.
1．Charge the batteries
2．Do not hold the bake crank
when start.
3 ． Refer to the “starting
operation” section in manual.
4．Pull up the kickstand.
5．Reset the governor handle.
6．Dispose according to the
APP fault code.
Running speed is
1． Low battery power
1． The charger is breakdown.