Need help?Do you have a question about the Doorson 300 and is the answer not in the manual?
Key safety instructions and warnings to follow during the use of automatic doors.
Overview of different door types in product line 300, including drive systems and descriptions.
Details on the standard, standard redundant, and mechanical redundant drive system components.
Explains how to select operating modes using COM20 and COM21 selectors.
Description of the COM20 touchscreen selector for mode changes, settings, and error display.
Overview of the COM21 button-operated selector, its functions, and LED indicators.
Details on additional system entries and their priority order for controlling door operation.
How the system operates during power supply shortages using battery support.
Procedures for exiting and entering the building using different operating modes.
Description of the energy save system that reduces power consumption when the door is idle.
Explanation of the redundancy system testing to ensure continuous operation in case of faults.
Details on the standard operating procedures for the Type 300 A automatic sliding doors.
How to activate the break-out function for emergency exits on Type 300 A doors.
Possibility of increasing the passage opening size by combining fully open door wings.
Details on the intended use of 300 F fire-resistant doors for non-escape routes.
Details on the intended use of 300 EF fire-resistant doors for escape routes and emergency exits.
Describes normal sliding, transition to fire operation, and fire mode operations for these door types.
Explanation of LED indicators on the EC4 controller and the built-in buzzer for diagnostics.
Details on short beeps during operation and interval/long pulses for warnings on COM21.
Describes error indications via flashing and beeping, and how to interpret error codes.
Guidelines for handling errors, including resetting the system and contacting service.
Comprehensive lists of warning and error numbers with their corresponding solutions.
Recommended methods and products for cleaning door leaves and surfaces.
Consulting experts for uninstallation and guidance on material transport and storage.
Recommendation for annual check-ups and testing of the doors by authorized service providers.
Information about the CE label attached to the drive cover and EU directive compliance.
To Next Page
General