To Next PageTo Next Page
Need help?Do you have a question about the Doosan L6-60HZ-T4F and is the answer not in the manual?
General| Model | L6-60HZ-T4F |
|---|---|
| Emission Standard | Tier 4 Final |
| Rated Output (kVA) | 6 kVA |
| Frequency (Hz) | 60 Hz |
| Emissions | Tier 4 Final |
| Voltage | 120/240 V |
| Operating Temperature | -20°C to 50°C |
| Power Source | Diesel |
Essential safety guidelines for operation, maintenance, and handling of the unit.
Procedures for safe electrical operation, including grounding requirements and shock prevention.
Information on hazardous substances used in the unit and safe handling practices.
Precautions and procedures for safe handling, charging, and jump-starting the battery.
Safety measures related to the engine's hot coolant and radiator pressure cap.
Guidelines for safely transporting and towing the unit, including speed limits and vehicle suitability.
Proper use of safety chains and precautions for welding operations on the unit.
Explanation of safety decal symbols (DANGER, WARNING, CAUTION) and how to obtain replacements.
Procedures for safely lifting and positioning the light tower unit.
Controls and instruments for the L6 model, including startup and operation.
Controls and instruments for the L8 model, including startup and operation.
Description and function of controls and instruments on the LS model panel.
Explanation of controls and instruments for the LSC 60 Hz model.
Explanation of controls and instruments for the LSC 50 Hz model.
Instructions for manual winch operation and tower setup procedures.
Procedures for raising the tower and extending it to its working height.
Instructions for operating the electric winch system.
Steps for lowering the tower and preparing the unit for movement.
Checks to perform before starting the engine and unit.
Step-by-step guide for starting the engine and the unit.
Procedure for safely stopping the engine and the unit.
Daily checks for wiring, electrical terminals, and grounding circuit integrity.
Maintenance for hoses, air cleaner, tires, and fuel/water separator.
Maintenance for engine radiator, coolant, tower cables, pins, and guides.
Maintenance of engine protection systems and control compartment inspection.
Maintenance for fuel tank, battery, fasteners, instruments, and running gear.
Procedures for cleaning, maintaining, and repairing the unit's exterior finish.
Overview of troubleshooting approach, problem diagnosis, and action planning.
Best practices for diagnosing issues and correcting root causes before disassembly.
