Dorel DA4162ND - Page 10

STEP 4 Tighten all screws clockwise.
STEP 2 Move the mattress support (D) to the lowest position by unscrewing mattress support hex
socket head bolts (2) using Allen key (3).
2-IN-1CRIB
DA4162ND
TODDLER BED & DAY BED ASSEMBLY INSTRUCTIONS: STARTING
FROM CRIB
TODDLER BED & DAY BED ASSEMBLY INSTRUCTIONS
TODDLER BED & DAY BED ASSEMBLY INSTRUCTIONS: STARTING
FROM SCRATCH
STEP 2: Follow step 3 to 4 for the TODDLER BED & DAY BED assembly instruction located
above (starting from crib).
STEP 1: Follow step 1 to 2 of the crib assembly instruction.
STEP 1 Detach the stationary side (B) with 2 side frame (A) by Allen key (3).
STEP 3 Using Allen key (3), attach the TODDLER BED & DAY BED Guard rail (C) using hex
socket head bolts (1), spring washer (7) gate pin (6), and barrel nuts (5) between 2 side frame (A)
(see illustration).
DIAGRAM A
3
5
7
7
1
6
A
B
C
D
6
1
5
A
HARDWARE LIST
ALLEN KEY
1 PC
GATE PIN
2 PCS
BOLT
2 PCS
HEX SOCKET HEAD BOLT
16 PCS
RUBBER STOPPER
2 PCS
HEX SOCKET HEAD BOLT
6 PCS
6 mm x 3/4"
1/4" x 2-1/2"
1
4
5
63
2
3/16" x 3/8"
BARREL NUT
4 PCS
7
8
BARREL NUT
2 PCS
-7-