27
base frame. This quickly creates extra workspace, which makes it easier to
erect. Make sure that the black valves - attached to the inside of the roof -
are open when inflating. The markings are placed on the black valves. The
black valves connect the main air hoses with each other by means of a light
grey, thinner air hose. If necessary, you can also close the black valves and
close the air hoses separately. This is especially useful when looking for a
possible leak in the air frame.
3.5 The additional roof rails that are in the sewn-on tunnels in the roof and
extra uprights can be inflated now and the uprights can be placed in the
right position.
3.6 Two inflatable canopy bars are included for extra stability in the front
canopy.
3.4 The base frame of the awning can be inflated by using one of the three
valves, which are attached to the outside of the awning. It does not matter
which valve you choose. Please make sure, both other valves are closed.
Dorema recommends using the valve of the center upright to inflate the
To Next Page
Loading...
