30
4. LEAKING AIR TUBES
As mentioned before in this instruction, rst you need to make sure the
valves are screwed on tightly enough (nger tight!). In case the air tube
loses air slowly, unscrewing the valve and assembling it again is usually
the simplest solution for the leakage. In case one of the air tubes really
gets punctured it can be repaired in a simple way.
1. Remove the ty-rap from the slider and open the zip.
2. Remove the transparent air tube from the casing, fit the valve and
inflate the tube with a pump.
3. Dip the tube under water and trace the leak.
4. Use the enclosed repair patch in order to close the leak.
5. Re-fit the air tube back into the casing, assemble the valve on the
correct position, close the zip and ALWAYS secure the slider of the zip
with a ty-rap. Your StarCamp dealer can also supply all replacement
parts. In case you do not have a repair patch available, a Dorema
TEAR-AID repair patch type B can also be used. Type B is especially
suitable for all PVC materials. Such a repair set is also available at your
local dealer.
To Next Page
Loading...
