Dostmann Electronic P700 Series Operation Manual

22
P700
Measuring value 1 + 2 autom. recognize FC (hex)
Enabling the keyboard 0 (hex)
Read version number of firmware l (ASCII)
Read memory (only LOG-instruments) n (ASCII)
Attention: By sending the command FC (hex) you
will get the complete data, the instrument lock auto-
matically the keyboard. To release the keyboard you
have to send the command 0 (hex).
The datas would be sent in the following format.
Data Type = String
The length of the string depends on the instrument
(a two-channel or one-channel instrument).
For PC communication with the P700 series via the
USB interface, it is necessary to use a driver (VCP
Virtual Com Port).
The required driver can be found on the optional
“DE-Graph” software for P700-series (order code
5090-0081). It is also possible to download the driver
from the Internet at: www.ftdichip.com.
Depending which PC operating system Used (Win-
dows7, XP etc.), there are different driver versions to
select.
5. Interface protocol
DE P700 Anleitung engl. 12/11 06.12.2011 10:04 Uhr Seite 22

Dostmann Electronic P700 Series Specifications

General

Brand	Dostmann Electronic
Model	P700 Series
Category	Measuring Instruments
Language	English