Page 12 / 27
device.
1) Start recording
In the ‘Start recording’ menu, press ‘Enter’ to start recording. While recording, press the next key
to show the current length in the braille display for three seconds. To pause recording, press
‘Enter’ to pause recording. The relevant menu will be shown.
Once the menu is displayed, press the up or down key to select Resume, Listen, Save, or Delete,
and press the enter key once more to execute that action. If you click ‘Enter’ in the Save menu,
the file will be saved and you will move to the recorded list.
2) Recordings lists
You can play files recorded with the Dot Mini as well as recorded files stored in an external
storage device.
Use the up and down keys to move between items. Press the up key to move to the previous
item, and press the down key to move to the next item. Press the up key and previous key
simultaneously to move to the beginning of the list. Press the down key and next key
simultaneously to move to the end of the list. Press ‘Enter’ to play the recorded file when the title
is shown on the braille display. You will enter ‘Recorded file playback’ state. In ‘Recorded file
playback’ state, you can check the playback position by reading the [hour:minute:second] on the
braille display. Press ‘Enter’ to pause, and press ‘Enter’ once more to resume from where you left
off. For example, as you listen to 1 hour 23 minutes 11 seconds of a display, the braille display
will show [1:23:11].
In ‘Recorded file playback’ state, you also can choose the playback length to 10 seconds, 1
minute, 10 minutes, and 30 minutes using the up and down keys. After changing the playback
length, press the left key to rewind one playback length from your current position. Similarly,
press the right key to forward one playback length from your current position.
3) Recording settings
To Next Page
Loading...