Page 18 / 27
4. [Power Precautions]
Insert the charger USB cable correctly and make sure it is firmly connected.
Do not bend, pull, twist, heat, or cut the charging cable. Doing so may damage the cable and
cause fire or electric shock.
Disconnect the charger when not in use.
There may be risks of electric shock when using the Dot Mini while charging.
When removing the adaptor, hold the part of the adaptor and carefully separate the adaptor from
the device. Pulling on the wire with extreme force to remove the adaptor may cause the wire to
disconnect and malfunction.
5. [High Temperature and Humidity Precautions]
Do not use the device in hot or humid places.
If the product comes in contact with water, turn off the power, and completely dry it before using
it again.
Do not place the device in direct sunlight or laden car windows, blankets, electric boards, and
carpets for extended periods of time. The produce may deform, not operate properly, or explode.
If the temperature of the product rises rapidly, please stop using the product and contact the
service center.
*Normal operating temperature is -10°C to 50°C
6. [Chemical Precautions]
Do not use alcohol, benzene, acetone, or any other chemical-based solution to clean the device.
The device may malfunction or may cause fire. In addition, there may be irreparable damage done
on the device.
To clean, gently wipe the device with a soft cloth.
To Next Page
Loading...