EasyManua.ls Logo

DOT MINI - Skin, Storage, and Battery Safety

DOT MINI
27 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Page 20 / 27
11. [Skin Damage Precaution]
When using the device for a long time, the surface temperature of the device may rise. It is not
unusual for the device to do this, and the device should still operate properly. Stop using the
device immediately if it causes skin spots, pigmentation, or burns.
If the device causes any allergic reaction, stop using the device immediately and consult a doctor.
12. [Storage Precaution]
When not in use, disconnect the charging cable from the outlet and store it in a safe place.
When storing the power adaptor, be careful not to bend or twist the USB cable. If the USB cable
is severely folded or twisted, the cable may be peeled off or broken, which may result in a
malfunction or accident.
13. [Battery Precaution]
In hot or humid places, the battery may not charge well or may be consumed more quickly
than usual.
Do not expose the battery or charger to direct sunlight or use it in a place with high humidity,
such as bathroom or a heated automobile.
- If you want to use the device again after leaving it unused for a prolonged period, use it after
the device is fully charged.
- Removing the battery by force may cause it to ignite or explode.
- Do not open, disassemble, damage, bend, deform, puncture, or crush the device.
- Do not attempt to alter or modify the battery, insert foreign objects, or immerse or expose to
liquids such as water.
- Once the device is fully charged, disconnect the charger from the outlet to prevent
unnecessary power consumption.
- It is recommended that you send both the device and charger when sending the product to a
customer service center due to any customer issues.
- If the product becomes too hot during charging, please separate the charger and Dot Mini
using gloves or other equipment.
- High temperature may cause damage to the product. At this time, unplug the USB cable and